 |
 |
|
#21
12-25-2009, 09:21 PM
|
||||
|
||||
The biggest problem with HK's is they pretty much screw up your brass with their blow back gas system. So the bulk junk stuff is all I put through mine.
 If your willing to let it run in the tumbler for two days you can reuse the stuff.
__________________
|
|
#22
12-25-2009, 10:01 PM
|
||||
|
||||
|
Ah I've recently installed a Port Buffer on mine and I was incredibly amazed at how much of a difference it's made. It now damages brass no more than an AR unless of course it hits a tree
 . Also from what I hear the weld on steal case deflector will do the same thing only it's permanent. I haven't tried the deflector myself however. The brass can still come out a bit dirty however .RTG has both of them and for the $50 bucks it was worth it as you can't tell you fired the brass out of an HK anymore  I'll gladly take pictures of the difference to the brass a little later if you'd like http://www.robertrtg.com/pofport_carry.html http://www.robertrtg.com/hkshelldeflector.html
__________________
 
|
|
#23
12-26-2009, 01:45 PM
|
||||
|
||||
|
We must be talking about two different problems. The brass coming out of mine has carbon scoring from the fluted chamber, the full length of the case.
I set of lines burned into the brass from the mouth to the base of the shell casing. Other than that problem nothing a full length sizing die can't fix.  
__________________
Last edited by ALS; 12-26-2009 at 02:12 PM.. Reason: Add pic so others can understand what we are talking about
|
|
#24
12-26-2009, 02:00 PM
|
||||
|
||||
|
Indeed there truly is no fix to that problem....well unless you want it to become a single shot
. I have however found the cleaner burning powders pretty much take care of it, as much as possible anyway. Still a bit of a pain to clean the brass luckily I don't mind if they don't look the prettiest. On a side note I just made a six round magazine for it by cutting down a 20 rounder. The thing works flawlessly so far, much better than it worked prior to cutting much of it off including some rather nice sized dents. A buck and 10 minutes well spent (once again happiness for me).
__________________
|
|
#25
12-27-2009, 02:07 AM
|
||||
|
||||
|
Really the rules should be revived.
Five rules for Men to follow a happy life. 1.) Hot mates in the amount of the man's choosing. 2.) Guns 3.) Targets to fire at (living or dead or perhaps inanimate) 4.) Other crap to mod a gun with 5.) Infinite Ammunition
__________________
"I will write Peace on your wings, and you will fly all over the world."
|
|
#26
12-27-2009, 05:57 AM
|
||||
|
||||
|
Quote:
1. peace and quiet 2. eat 3. sleep 4. bathroom 5. sports
__________________
 LETS GO YANKEES! CONGRATS ON #4 GIANTS!
|
|
#27
12-27-2009, 09:08 AM
|
||||
|
||||
|
Quote:
2.) Check 3.) Check 4.) Like Lazurs, Bayonets, grenade launchers, extra shell holders, extra cigar holders, chainsaws, electric meat slicers, electric frying pan, cup holder, MP3 jack, rocket launchers, a more guns attachment to your gun so you can carry multiple guns on one gun, and most importantly...... cigarette lighter preferably an unextinguishable Zippo 5.) I suppose one always needs more xD I suppose I am on my way to ultimate happiness  Quote:
. What I didn't like however was a big dent halfway up the body of the casing caused by hitting the receiver, but since I bought a Port Buffer I have not had one case dented (unless you count the ones hitting the trees ).
__________________
Last edited by jung_adore_ALIZEE; 12-27-2009 at 10:32 AM.. Reason: Automerged Doublepost
|
|
#29
12-27-2009, 10:55 AM
|
||||
|
||||
|
the ultimate stock just cause you never know when you'll have to dig a hole while shooting stuff
 Who needs a stinking Grenade launcher when you have one of these?  Don't forget you need your best friend to spot for you  and of course... 
__________________
Last edited by jung_adore_ALIZEE; 12-27-2009 at 10:59 AM..
|
|
#30
12-27-2009, 10:56 AM
|
||||
|
||||
|
Quote:
__________________
 Je t'aime Alizée
|
 |
|
|
 |
 |
Linear Mode
